RCNS2-114 Pneumatic Single Reverse Notch Sealer
The RCNS2-114 is commonly know as the pistol grip sealer and it applies a reverse notch seal on high tensile strapping. This is a very durable tool with minimal wear parts and can be operated single handedly.
This tool is commonly used to install street signs, construction of oil drilling platforms, chemical plants, water treatment plants, and installation of cables etc., Due to its pneumatic mechanism, the application is fast and efficient and it saves operator time and fatigue. Allstrap carries all Signode tools and wear parts and also does a great repair job of damaged tools in their full- fledged tool repair facility.
Given below are some of the wear parts of the RCNS-114 that can get damaged with constant use.
Sealer Assembly
424126 Side plate (114)
424211 Side plate (34)
424134 Jaw (114)
424213 Jaw (34)
424127 Notcher (114)
424212 Notcher (34)
424132 Jaw pin
424138 Boot
The above wear parts can get damaged if used constantly and not being maintained properly as given in the manual. Any tool can get damaged as it is used in harsh working conditions most of the time.
Allstrap not only deals with tools from major brands, but also carries out repair works of these tool in their high-tech repair facility which has all the modern tools and technology. The technicians in their repair center are manufacturer certified and can fix the tool in a very short time. They first find out the damaged part and change spare parts if needed and return the tool in under a week’s time.
Call Allstrap repair facility to get more information on tools and tool repair.
________________________________________________________________________
Grip Pack 114 Sealer Tool Repair & List of Wear Parts
This Grip Pack 114 Sealer is the first battery powered sealer for high tensile strapping. This tool can place 200-300 seals per battery charge and so it has become a popular tool in the industry. Allstrap stocks all the wear parts for this tool and its tool repair department services the tools from all manufacturers. The turnaround time is usually a week.
Not only does Allstrap service tools, they have a full strapping tool repair department where manufacturer certified technicians take a good look at the tool and fix the problem promptly.
Common Wear Parts in GripPack 114 Sealer
Notcher #800266
Jaw #800245
Lower jaw pin #800267
Upper jaw pin #800244
Upper jaw pin #800285
Rubber boot #800265
The above replacement parts can get damaged due to constant use. To make sure that the tool is in good working condition it is better to take care of it as prescribed in the tool manual. It is very important to clean the tool daily and apply machine oil so that it is in working condition at all times.
In case of damage to the tool or any wear parts, it is best to send the tool to the Allstrap tool repair department. All the technicians are manufacturer certified and trained to repair tools in a very efficient manner.
Allstrap also stocks tool parts from all manufacturers. They undertake repairs and the turnaround time is usually a week. Call Allstrap Tool Repair for further inquiries.
_______________________________________________________________________
BXT2-32 Tool Repair- AAR Approved
The BXT2-32 is a very powerful battery powered combination strapping tool used in metal and lumber industries. It is also a very popular tool from Signode and those who are switching over to poly strapping from steel have found it very reliable. Allstrap is a dealer who stocks tools from Signode along with spare parts. The Allstrap tool repair department is manufacturer certified and guarantees a one week turnaround.
Since the price of strapping tools are so high, it’s better if repairs are done only by trained technicians who have a good knowledge of the tool and its parts. Allstrap uses manufacturer certified technicians to repair tools and replace parts. Allstrap also stocks tool parts for the BXT2-32 and other tools.
BXT2-32 wear parts:
Tension wheel #429731
Tooth plate # 429734
Knife #429892
Battery 36V/ 2.6 AH Li.Ion #429834
Battery 36V/ 2.0 AH Li.Ion US #429835
Battery 36V/ 2.6 AH Li.Ion JP #429881
The wear parts in any tool are bound to get damaged with continuous use. Even if the operator takes great care in maintaining the tool as given in the manual, the tool may give in after a point. The feedwheel or the tension wheel is a major component in most strapping tools that wears after time. It is important to oil the machinery and keep them clean to ensure minimal wear and tear. This also helps keep it functioning without a hitch.
Allstrap is popular not only for the tools they stock but also for repairing them and delivering them on time. Usually it takes a week for their trained technicians to fix the problem. Call Allstrap Tool Repair for further inquiries on repairing your BXT2-32 tool or other strapping tools.
________________________________________________________________________
PRHR-114 Tool Repair- AAR Approved
The PRHR-114 is a pneumatic push style combination tool from Signode. It is a very powerful tool and it has become quite popular for its efficiency to tension, seal and cut all in one go. Allstrap carries out tool repair for all strapping tools and stocks all the wear parts that are necessary to fix the PRHR-114 tool. Below are the list of parts for the PRHR-114.
PRHR-114 Parts List
Feedwheel #423398
Valve latch spring #004131
Valve latch #423555
Stop lever #423393
Roll pin, 3 x 16 #280840
Cutter #306509
Cutter spring #015626
Seal stop (34) #424442
Seal stop (114) #423559
Breaker foot #423401
Outer bearing #008863
Guard #306512
Rear side plate #424227 (PRHR-34)
Rear side pate #423417 (PRHR-114)
Notcher #424228 (PRHR-34)
Notcher #306503 (PRHR-114)
Ram #423411
Sealer link #004134
Ram pin #004126
Link pin #008507
Jaw #424233 (PRHR-34)
Jaw #423558 (PRHR-114)
Jaw pin #008506
Front side plate #424226 (PRHR-34)
Front side plate #423418 (PRHR-114)
Socket head shoulder screw #423557
Gear Housing
Idler gear #008766
Idler gear plate assy #306389
Signode Air Motor
Filter assembly #024631
Ball bearing #024633
Back end plate #024653
Rotor #423423
Vane #024651
Front end plate #423794
Idler carrier assembly #423403
Idler #423060
PRHR-114 parts aren’t available in any local hardware store. So it is best to send them to a good tool repair department, like Allstrap, and let them fix it for you. Tool repairs generally take about a week, depending on damage.
Allstrap is a well-known dealer who also has a fully qualified and company certified tool repair department. Call Allstrap for inquiries about PRHR-114 repair and other tools Allstrap services.