The Signode PNSC-2 is a pneumatic push type combination tool for steel strapping. It can be used with regular duty or high tensile steel strapping and can beused on round or irregular packages. As will all Signode’s tool, this tool is also easy to operate and very reliable. This has made it very popular in the industry.
This tool has all metal and alloy parts and weighs about 9.5 lbs. The tool uses its duck bill nose to push the seal, a feedwheel to pull tension and its jaws open to notch the seal in a full combination action. In this process about 700lbs of tension is applied to steel strapping. The PNSC-2 is comparatively easy to operate due to the two bottom control system.
Specification:
- ½”-3/4”x.017-.025” Apex Plus or Magnus strapping
- Joint type: Single reverse notch
- Weight 9.5lbs
The strapping in this tool easily slides out easily after every strapping cycle. Since the tool is made of metal alloys, it can withstand harsh environment. Even after such exposer to harsh conditions, it produces a perfect and strong single notch seal join which is of great strength.
How to use the strap with the PNSC-2:
It is very important to follow safety precautions before using any tool, battery operated or otherwise. The tool comes with a good manual and also advices on safety precautions to be undertaken while using the tool. Safety goggles and protective gloves are a must before beginning to use the tool. Also, a safe distance must be kept from the tool and the package.
First the strap is threaded through the seal and then wrap the strap around the load. Remove excess slack and then pull the opposite end back through the seal over the top of the original strap. Holding the PNSC-2 in one hand and strap in the other use the lever to lift the foot and slide the strapping in. In order to ensure tight tensioning, slide the tool as far as possible. Then press the button to start tensioning. Once the desired level is reached the tool will automatically shut off. Now the sealing button is pressed to complete the process of sealing. Then the strap is cut and released. Overall, it is a very easy tool to use and is light weight. With a single notch seal howevers, 50 per cent strength is only possible.
The PNSC-2 is generally available rebuilt, please call Allstrap for rebuilt pricing.